✨ High-Visibility Arrow Reflective Tape – Make Dark Edges Easier to Notice
✨ High-Visibility Arrow Reflective Tape – Make Dark Edges Easier to Notice
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
✨ High-Visibility Arrow Reflective Tape – Make Dark Edges Easier to Notice
Make Dark Edges Easier to Notice When Light Hits Them
Micro-prismatic reflective tape designed to return incoming light toward its source, helping vehicles, equipment and marked areas stand out more clearly in low-light conditions.
Edges and Equipment Can Disappear Into the Dark
Trailers, machinery, gates and work-area boundaries can become harder to identify once ambient light drops.
Reflective marking adds a highly visible surface that reacts when headlights, flashlights or other directed light reaches it.
- Highlight edges and boundaries
- Add directional arrow markings
- Increase visibility under directed light
It Reflects Light — It Does Not Create Light
Tap each section to understand what changes the visible reflective effect.
1. An external light source reaches the tape
Headlights, flashlights and other directed light sources illuminate the micro-prismatic surface.
2. The prismatic surface redirects part of that light
The structured reflective surface is designed to return incoming light toward the direction it came from.
3. Viewing conditions affect the result
Brightness can vary with light intensity, distance, viewing angle, installation angle and surface condition.
Cut, Position and Apply Where You Need a Visible Marker
The flexible PET construction can be cut to length and applied to compatible clean, dry surfaces.
Built for Compatible Exterior Marking Applications
The supplied product information lists PET and PVC lattice construction with a rubber-based adhesive and an operating temperature range from 0°C to 70°C.
- PET / PVC lattice structure
- Rubber-based adhesive backing
- Listed temperature range: 32°F–158°F
One Roll for More Than One Visibility Job
Use it as supplemental reflective marking on compatible vehicles, equipment and work-area surfaces where greater low-light visibility is useful.
Choose the Length That Fits Your Project
- Clean and fully dry the surface before application.
- Remove dust, grease and loose surface contamination.
- Apply within the listed 0°C–70°C temperature range.
- Press firmly across the entire adhesive surface.
- Avoid washing the applied area for at least 24 hours after installation.
- Compatibility and adhesion may vary by paint, coating, plastic and surface texture.
Frequently Asked Questions
Does the tape glow by itself at night?
No. It is reflective rather than self-luminous. It requires an external light source such as headlights or a flashlight to create a strong reflective effect.
What makes the tape reflective?
The supplied product information describes a micro-prismatic reflective surface designed to redirect incoming light toward its source.
Can I cut the tape?
Yes. The roll format can be cut to the length needed for your compatible application.
Can it be used on curved surfaces?
The flexible construction can follow some curved and edged surfaces, but adhesion will depend on curvature, texture and the surface material.
Is this a certified replacement for required vehicle reflectors?
No certification information was supplied in the original product details. Treat it as supplemental reflective marking unless your selected product specifically states compliance with the regulations required for your application.
What roll lengths are available?
The supplied product information lists 3 m, 5 m, 10 m, 25 m and 50 m rolls, all at 50 mm width.
Add Reflective Marking Where Visibility Matters
Cut it to length, apply it to a compatible clean surface and add high-visibility arrow marking to vehicles, equipment, barriers and work areas.
Choose Your Design & Length50 mm width • Multiple designs • 3–50 m roll options
