🧲 Inside/Outside Welding Angle Magnets – Fixed & Adjustable Magnetic Positioning Tool

🧲 Inside/Outside Welding Angle Magnets – Fixed & Adjustable Magnetic Positioning Tool

 1800+ Reviews
🔥1000+ orders in the last 24h
$24.99
$24.99 $49.99
SAVE 50% Sold out

BUNDLE & SAVE

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
 
add_shopping_cart

-

Ordered

local_shipping

- - -

Order Ready

redeem

- - -

Delivered

🧲 Inside/Outside Welding Angle Magnets – Fixed & Adjustable Magnetic Positioning Tool

🧲 Inside/Outside Welding Angle Magnets – Fixed & Adjustable Magnetic Positioning Tool

$24.99
$24.99 $49.99
SAVE 50% Sold out
Magnetic Welding Positioning Tool

Hold the Joint From the Side You Can Reach.

Position steel from the inside or outside of the joint when traditional clamping access is limited—so your hands can focus on fit-up, alignment and welding.

Inside outside welding angle magnet positioning steel plate at a corner
Inside or Outside Holding
Fixed & Adjustable Options
Flat, Square & Round Stock
The Fit-Up Problem

When Your Hand Becomes the Clamp, the Job Gets Harder.

Corners, closed sections and awkward assemblies do not always leave room for a conventional clamp. A magnetic positioning tool lets you hold the workpiece from a more accessible surface.

×
Limited inside access The joint may be easy to see but difficult to clamp from inside.
×
Two hands already occupied Holding stock manually leaves fewer hands available for alignment and tack welding.
×
Different stock shapes Sheet, tube and angled pieces do not always cooperate with the same clamping setup.
Adjustable magnetic welding angle holder positioned on the outside of a metal corner
Choose the Surface You Can Reach

Inside Joint? Outside Joint? Both Work.

The magnet can contact the workpiece from either side, helping you position stock where inside access would otherwise make the setup inconvenient.

Holding from the outside
Place the magnetic faces against the exterior surfaces when the inner corner is blocked or difficult to reach.
Holding from the inside
When the inside corner is accessible, position the magnet directly against the inner faces of the workpieces.
Breaking the magnet away
The built-in hex opening provides a leverage point to help separate the magnet from the steel after positioning.
Pick the Setup Style

Fixed for Speed. Adjustable for Flexibility.

Choose a fixed-angle model for common welding layouts, or an adjustable version when the geometry changes from job to job.

Fixed Angle 

Fast Repeatable Positioning

Designed around common 90° and 30° / 60° welding setups when you want a straightforward grab-and-position tool.

Adjustable Angle 

Set Angles From 30° to 270°

Adjust the hinge for changing joint geometry, with quick reference positions for 30°, 45° and 90°.

Locking adjustable welding magnet angle with hex key
Adjustable Model

Set the Angle. Then Lock the Setup.

Adjustable versions let you change the working angle, position the stock and secure the chosen setup before welding.

Adjustable working range from 30° to 270°
Quick angle-setting positions at 30°, 45° and 90°
Locking mechanism helps maintain the chosen angle
Made for Real Fit-Up Work

Hold More Than Flat Plate.

Use the magnets to help position different steel profiles during fabrication, assembly and tack-welding preparation.

▰
Sheet Metal Support corner and panel fit-up.
○
Round Pipe Useful when positioning tubular fabrication.
□
Square Tube Hold common frame and structural layouts.
∠
Angled Stock Support non-flat fabrication setups.
More Ways to Position

Work Around the Shape— Not Against It.

The inside/outside magnetic layout gives fabricators another positioning option when conventional clamps are awkward around curved or enclosed workpieces.

Position from accessible exterior surfaces
Useful with round, flat and angular steel
Keep the joint accessible for fit-up and tack welding
Choose Your Model

Specifications

Magnetic pull force and dimensions vary by model.

Model Type Height Angle Magnetic Pull Weight
Fixed Small 3" 90° / 30°–60° 20 lb Included in fixed combo
Fixed Medium 5" 90° / 30°–60° 33 lb Included in fixed combo
Fixed Large 6" 90° / 30°–60° 40 lb 1.7 lb
Adjustable Medium 4.7" 30°–270° 26 lb 1.2 lb
Adjustable Large 6" 30°–270° 33 lb 2.0 lb
Magnetic pull force depends on the selected model and proper contact with compatible ferrous material. Always confirm alignment and secure the workpiece appropriately before welding.
Quick Answers

Frequently Asked Questions

What makes an inside/outside magnet different?
It is designed so the magnetic faces can engage the workpiece from either the inside or outside of a joint. This is especially useful when one side of the joint is difficult to access.
What types of material can it hold?
It is intended for compatible ferrous stock such as sheet metal, flat stock, round pipe, square tube and angled steel.
What is the difference between fixed and adjustable models?
Fixed versions are designed around common 90° and 30° / 60° layouts. Adjustable versions can be positioned between 30° and 270° for changing fabrication angles.
How do I remove the magnet after positioning?
The tool includes a hex opening that can be used as a leverage point to help break magnetic contact with the workpiece.
Which adjustable angles can be set quickly?
The adjustable versions provide angle-setting positions for 30°, 45° and 90°, while the hinge allows additional positions within its working range.
Which size should I choose?
Choose based on your typical workpiece size, desired magnetic pull and whether you need fixed or adjustable positioning. Larger models provide higher listed magnetic pull force.
Smarter Fit-Up

Hold the Metal. Free Your Hands.

Give yourself another way to position steel when clamps cannot reach the joint—inside, outside, fixed or adjustable.

🧲 Choose Your Angle Magnet
View full details