🔩 6×14mm Short Expansion Screw Set for Cabinet Hinge Repair & Stripped Thread Restoration
🔩 6×14mm Short Expansion Screw Set for Cabinet Hinge Repair & Stripped Thread Restoration
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
🔩 6×14mm Short Expansion Screw Set for Cabinet Hinge Repair & Stripped Thread Restoration
Restore Stripped Screw Holes Without Replacing the Furniture
Compact 6×14mm metal expansion anchors create a stronger fixing point inside worn or stripped holes so loose cabinet hinges can grip firmly again.
A Small Anchor Can Save a Loose Door
When ordinary screws no longer hold, the anchor expands inside the damaged hole as the matching screw tightens, creating a firmer mechanical lock.
Insert. Tighten. Lock Firmly in Place.
The metal sleeve sits inside the prepared hole. As the screw is tightened, the anchor expands against the surrounding material to reinforce the fixing point.
Helps restore grip where the original screw hole has become worn or stripped.
Helps reduce sagging, shaking and repeated hinge loosening.
Useful when you want to preserve the existing cabinet, wardrobe or fixture.
Keep spares on hand for future hinge and hardware repairs.
Useful Across Common Household Surfaces
The product page lists use with wood and engineered wood, concrete or masonry, ceramic tile, stone, hollow walls and drywall, depending on the installation and intended load.
Drill. Insert. Position. Tighten.
Designed for a 6mm drilled hole with a minimum depth of 15mm.
Create a 6mm hole with a minimum depth of 15mm.
Push the metal expansion anchor fully into the prepared hole.
Align the hinge plate or fitting with the repaired fixing point.
The anchor expands inside the hole to create a firmer lock.
Small Size. Strong Mechanical Grip.
The anchor measures approximately 6×14mm. The matching screw shown on the product page measures about 16mm long, with a 4mm shaft and 7.8mm head.
One Set for the Loose Hardware You Keep Putting Off
Repair loose doors that sag or wobble.
Reinforce worn hinge fixing points.
Refresh loose hardware in humid areas.
Useful for common furniture fittings.
Restore grip where ordinary screws spin or pull loose.
Create a strong fixing point for suitable applications.
Made for Reliable Household Repairs
The listing describes high-strength corrosion-resistant metal construction designed for repeated everyday use.
Wear suitable eye protection when drilling. Check for hidden wiring or pipes before drilling into walls. Do not overtighten the screw after the anchor is firmly expanded. Confirm that the material and anchor are suitable for the intended load. For heavy, overhead or safety-critical installations, seek professional guidance.
Product Details
Frequently Asked Questions
What size hole do I need?
The product page specifies a 6mm drilled hole with a minimum depth of 15mm.
What is the anchor size?
The metal expansion anchor measures 6 × 14mm.
Can this repair stripped cabinet hinge holes?
Yes. That is one of the main intended uses listed on the product page.
Can I use it on tile or stone?
The listing shows use on ceramic tile and stone surfaces, but suitability depends on the material, drilling method and intended load.
Should I keep tightening after it feels secure?
No. Once the anchor has expanded firmly, avoid overtightening to reduce the risk of damaging the surrounding material.
Restore the Fixing Point. Save the Furniture.
A compact 6×14mm expansion anchor system for loose hinges, stripped holes and common household hardware repairs.
