12V DIY OIL EXTRACTOR PUMP
Change Oil From Above
On Compatible Applications.
A compact 12V electric pump designed to transfer used oil into a waste container with less mess and less time spent under the vehicle.
Work From AboveReduce under-car access on compatible vehicles
Cleaner TransferMove used oil directly into a waste container
12V Battery PowerConnect with the included battery clips
Compact Garage ToolEasy to keep with routine maintenance gear
LESS MESS • LESS HASSLE
Skip the Drain-Pan Routine When Your Vehicle Allows Top-Side Extraction.
Instead of opening the drain plug underneath, compatible applications can be serviced through an accessible oil point such as a dipstick tube.
SIMPLE SETUP
Insert. Connect. Extract.
1
Insert the HoseFeed the suitable inlet hose into the accessible oil source.
2
Connect 12V PowerRed clip to positive, black clip to negative.
3
Switch On & ExtractTransfer the used oil into a proper waste container.
Slightly warm oil generally flows more easily than cold oil. Never work with dangerously hot oil.
KNOW BEFORE YOU PUMP
Built for Compatible Oils—Not Fuel or Water.
Designed For
Engine Oil
Lubricating Oil
Gear Oil
ATF
Do Not Use With
Gasoline
Diesel Fuel
Water
Flammable Liquids
Important: do not use with gasoline, diesel fuel, water or other liquids not specified for the pump.
MORE THAN ONE VEHICLE
One Compact Pump for Multiple Compatible Applications.
The supplied product information shows use around the garage with cars, motorcycles, ATVs, lawn mowers, generators and marine equipment, subject to access and fluid compatibility.
Cars
Motorcycles
ATVs
Lawn Mowers
Generators
Marine Equipment
COMPACT PERFORMANCE
Small Enough for the Garage Shelf. Built for Routine DIY Extraction.
Power Supply12V DC
Rated Power100W
Rated Speed2800 RPM
Rated Flow1–4 L/min
Actual flow can vary with oil viscosity, oil temperature, hose diameter, hose length and the application being serviced.
COMPLETE KIT
Hoses, Connectors and 12V Clips Included for Compatible Setups.
Multiple hose sizes and connection pieces give the pump flexibility across different compatible service points.
Multiple Hose Sizes
Quick Connectors
12V Battery Clips
PRACTICAL CONSTRUCTION
Straightforward Hardware for Routine Garage Use.
The supplied product information highlights an aluminum-alloy pump head, a simple ON/OFF switch and a coiled power cable for practical workshop handling.
Aluminum-Alloy Pump Head
ON/OFF Switch
Coiled Power Cable
PRODUCT DETAILS
What We Can Confirm
Product Type12V electric oil extractor pump
Power12V DC / 100W rated power
Rated Speed2800 RPM
Rated Flow1–4 L/min
Compatible FluidsEngine oil, lubricating oil, gear oil and ATF
Do Not Use WithGasoline, diesel fuel, water or flammable liquids
Pump HeadAluminum alloy
Included Connection12V battery clips, hoses and connectors shown in the source kit
QUESTIONS & ANSWERS
Before Your Next Oil Change
Will it work with every car?
No. Compatibility depends on oil-system access, dipstick-tube access and whether the supplied hose can reach the oil. Check the vehicle’s service information before use.
Do I still need to get under the vehicle?
On compatible applications, oil can be extracted through an accessible point above, such as a dipstick tube, reducing the need to access the drain plug underneath.
Should the oil be hot or cold?
Slightly warm oil normally flows more easily than cold oil. Never work with dangerously hot oil; allow the engine and oil to reach a safe working temperature.
Why can pumping speed vary?
Actual flow depends on oil viscosity, oil temperature, hose diameter, hose length and the application being serviced.
12V POWER • CLEANER TRANSFER • DIY GARAGE TOOL
Make Compatible Oil Changes Cleaner and Easier.
Keep a compact extractor in the garage for routine oil maintenance where top-side extraction is supported.
Choose Your Oil Extractor Pump
12V DC • 100W rated power • 1–4 L/min rated flow
