🚗 Pocket Digital Oscilloscope – Portable Signal Tester for Car Audio Tuning, Circuit Diagnostics & DIY Electronics ⚡
🚗 Pocket Digital Oscilloscope – Portable Signal Tester for Car Audio Tuning, Circuit Diagnostics & DIY Electronics ⚡
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
🚗 Pocket Digital Oscilloscope – Portable Signal Tester for Car Audio Tuning, Circuit Diagnostics & DIY Electronics ⚡
Stop Guessing What the Signal Is Doing.
See waveforms in real time, check key measurements and troubleshoot electronics without dragging a full-size bench oscilloscope to every job.

Electrical Problems Are Easier When You Can See the Waveform.
A portable scope gives you a visual reference so you can inspect signal behavior before deciding what needs attention.

200kHz Bandwidth. 2.5MS/s Sampling.
The current product graphics list 200kHz bandwidth and a 2.5MS/s sampling rate for many low-frequency electronics, audio and learning tasks.

Useful Testing Power Without Bench-Size Equipment.
The palm-size body makes it easier to bring waveform testing directly to the project.

Less Menu Digging. More Testing.
AUTO, MODE, UP, DOWN and RUN buttons keep common actions within reach, while the side trackwheel provides quick navigation.
- AUTO one-click adjustment
- MODE selection
- Up / Down controls
- RUN control
- Trackwheel navigation
- Type-C 5V/1A charging

Set It Down and Keep Both Hands on the Circuit.
A 90° foldable rear stand lets the unit sit upright on a flat work surface while you position probes or adjust components.

Useful Data at a Glance.
The current product imagery shows eight parameter measurements, AUTO adjustment and a 1kHz calibration square-wave output.

Work Away From the Bench.
The unit uses a built-in 1000mAh lithium battery and Type-C charging, making it practical for portable low-voltage diagnostic and learning work.

Connect. Observe. Diagnose.
Bench-Scope Thinking in a Pocket-Size Format.
Product Details
| Model | DSO152 |
|---|---|
| Product Type | Pocket Digital Oscilloscope |
| Display | 2.8-Inch LCD |
| Bandwidth | 200kHz — Current Product Graphic |
| Sampling Rate | 2.5MS/s — Current Product Graphic |
| Calibration Output | 1kHz Square Wave |
| Automatic Measurement | 8 Parameter Types Shown |
| Auto Setup | One-Click AUTO Adjustment |
| Battery | 1000mAh Lithium Battery |
| Charging | USB-C / Type-C, 5V / 1A |
| Stand | 90° Foldable Rear Stand |
| Signal Input | MXC Probe Interface — Current Product Graphic |
| Firmware | Firmware Upgrade Support Listed |
| Applications | Automotive Electronics • Car Audio • Circuit Diagnostics • DIY Electronics • Learning |
Quick Answers Before Ordering.
Can I use it for car audio tuning?
It can be useful for compatible low-voltage car-audio signal viewing and troubleshooting. Always stay within the instrument and probe input ratings.
What are the bandwidth and sampling rate?
The current product graphic lists 200kHz bandwidth and 2.5MS/s sampling.
Is it rechargeable?
Yes. The current product materials list a built-in 1000mAh lithium battery with Type-C 5V/1A charging.
Does it have automatic setup?
Yes. A dedicated AUTO function is shown for one-click automatic adjustment.
Can it stand on a workbench?
Yes. A 90° foldable rear stand is shown for hands-free viewing.
Put Real-Time Waveform Testing in Your Toolbox.
Carry a compact oscilloscope for automotive electronics, audio work, DIY circuits and learning — without hauling a full bench instrument to every project.
CHOOSE YOUR BUNDLE ABOVE
