✨4-in-1 Scriber Marking Line Ruler🛠️
✨4-in-1 Scriber Marking Line Ruler🛠️
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
✨4-in-1 Scriber Marking Line Ruler🛠️
Stop Measuring Every Hole Twice.
Cabinet handles, drawer pulls and woodworking layouts get easier when your measuring guide also helps position the holes. Meet the adjustable drilling square with three sliding guides, a locking angle joint and built-in bubble levels—all in one practical layout tool.
A Few Millimeters Off Can Change the Whole Finish.
Anyone who has fitted drawer handles knows the frustration: mark one hole, measure again, double-check the next, and hope everything lines up. This tool gives you a consistent physical reference for the repeated positions that matter.
Three Movable Guides. Repeatable Hole Positions.
Slide the three red blocks along the ruler, position them against the graduated scale, then tighten their metal locking knobs. Set up the hole locations you need before starting an installation—especially helpful for matching drawer and cabinet hardware.
Check Horizontal and Vertical Alignment in One Look.
The two integrated bubble vials help you check side-to-side and upright positioning as you line up the ruler. It's a handy reference when installing handles, brackets or trim on cabinets and panels.
Turn the Arms. Set the Angle. Lock Your Layout.
The ruler arms rotate around a central joint, giving you more flexibility than a fixed carpenter's square. Once positioned, the large center knob holds the selected angle while you transfer the reference to your material.
Make Cabinet Hardware Installation Feel More Organized.
Lay the ruler against a drawer front, set the positioning blocks to your handle spacing and use the guides as consistent hole-location references. It's the kind of small improvement that makes repeated hardware installation feel much more manageable.
Draw Straight Lines and Transfer Angles with Confidence.
The long ruler edges create a clear guide for tracing your layout onto wood panels. Metric and inch markings let you work with the units you prefer, while the center joint supports changing the working angle.
Opens for the Job. Folds Flat for the Toolbox.
Once your measurements are finished, rotate the arms into a slimmer configuration. The black aluminum-alloy ruler sections and red details give the tool a workshop-ready feel without requiring a bulky storage case.
From Cabinet Upgrades to Everyday Workshop Layouts.
Whether you're giving your kitchen a hardware refresh or planning lines for a woodworking project, the combination of measuring, positioning and angle adjustment helps you move through the layout stage with fewer tool swaps.
A Useful 40 cm Tool for Your Next Job.
The product gallery compares 400 mm and 650 mm ruler versions. The live product selector currently displays 40 CM, so check the chosen variant in the purchase area before ordering.
Horizontal ruler approximately 400 mm (15.75 in); vertical section approximately 372 mm (14.65 in); listed weight around 479 g.
Horizontal ruler approximately 650 mm (25.59 in); vertical section approximately 372 mm (14.65 in); listed weight around 540 g.
A Single Workshop Essential. Or More to Share.
The storefront offers four purchase quantities. Select the bundle and size shown in the actual Shopify purchase controls above to confirm the available configuration.
Four Practical Features. One Smarter Layout Routine.
Repeatable Positioning
Three sliding blocks help lay out multiple hole locations.
Adjustable Angles
A rotating center joint supports straight and angled measurements.
Dual-Level Reference
Horizontal and vertical bubbles help with alignment checks.
Every Detail Behind the Measuring Tool.
- Product
- 4-in-1 Adjustable Drilling Square / Multi-Function Marking Ruler
- Main Functions
- Measuring, hole positioning, adjustable angle marking and level reference
- Ruler Material
- Aluminum alloy with ABS components, as described by the seller
- Appearance
- Black ruler body with red positioning blocks and end details
- Positioning Guides
- Three movable, locking drilling-position blocks
- Listed Guide Holes
- Approximately 3 mm and 4.5 mm
- Level
- Dual-axis bubble level, horizontal and vertical
- Measurement Scales
- Centimeters and inches
- Center Joint
- Rotating adjustable angle with large locking knob
- 400 mm Variant
- Approx. 400 mm main ruler × 372 mm cross-arm; 479 g listed weight
- 650 mm Reference
- Approx. 650 mm main ruler × 372 mm cross-arm; 540 g listed weight; shown in gallery, not confirmed selectable
- Current Selector
- 40 CM style displayed on the storefront
- Purchase Quantities
- Buy 1 / Buy 2 / Buy 3 / Buy 4
Frequently Asked Questions.
Is this a traditional four-mode scribing pencil?
No. Despite the storefront title, the actual pictured product is an adjustable drilling square with a ruler, three drill-position blocks, an angle-locking pivot and dual bubble levels.
Can I use it to install cabinet drawer handles?
Yes. The sliding blocks are designed to help establish repeatable hole locations for compatible cabinet handles and drawer pulls.
Does it measure in both inches and centimeters?
Yes. The supplier's images and description show both metric and imperial markings on the ruler sections.
How many adjustable drill-position blocks does it have?
Three, each with a locking knob. The product description identifies guide holes of approximately 3 mm and 4.5 mm.
Can the angle between ruler arms change?
Yes. Loosen the central knob, reposition the arms and secure the joint at the desired angle before marking.
Does it include a spirit level?
Yes. Two bubble vials provide horizontal and vertical alignment references.
Which length is available right now?
The current product selector lists 40 CM. The image gallery also shows a 650 mm version, but its ordering availability is not established by the current selector.
Does it include a drill or other power tools?
No power drill is listed as part of the item. Drills, pencils, cabinetry and other objects in the demonstration images are illustrative.
Measure Once. Position with Purpose. Build with Confidence.
From matching drawer-handle holes to clean angled marking lines, bring measuring, positioning and alignment into one organized workshop routine.
Choose Your Drilling Square ↑Back to the product style and purchase options above.
