SELF-LEVELING • HIGH-GLOSS • MINERAL TEXTURE
Turn Tired Concrete Into
A Clean High-Gloss Floor.
Refresh garages, basements, workshops
and other hard-working spaces
with a self-leveling epoxy coating
designed to create a smoother,
brighter and more finished-looking surface.
✨ High-Gloss Finish
🛡 Daily-Wear Surface
🧼 Easier Cleanup
THE FLOOR CAN MAKE THE WHOLE ROOM FEEL UNFINISHED
Cover Dull Concrete With One Continuous Finish.
Old stains, repairs, rough concrete
and uneven color can make even
an organized garage or basement
feel unfinished.
🩶
Dull Concrete
Old floors look unfinished
🧽
Rough Texture
Shows dust and marks easily
🧱
Patchy Color
Old repairs stay visible
✨
Continuous Finish
Creates a cleaner overall look
WHY SELF-LEVELING MATTERS
Designed To Flow Into A More Continuous Surface.
Spread the prepared coating across
a properly prepared substrate
to create a more uniform,
high-gloss finished layer.
↔️
More Continuous Visual Finish
The coating spreads across
the prepared surface
rather than leaving bare concrete texture exposed.
✨
High-Gloss Appearance
Reflected light can help
practical spaces feel brighter
and more finished.
BUILT FOR SPACES THAT ACTUALLY GET USED
A Continuous Surface Is Easier To Wipe Down.
Once properly cured,
the coated surface provides
a more continuous finish
for routine wiping and everyday cleaning.
GLOSS WITHOUT A COMPLETELY FLAT FEEL
Quartz Mineral Texture Adds Grip & Visual Depth.
Mineral texture creates
the characteristic speckled appearance
while helping provide more traction
than a completely smooth glossy surface.
No coated floor should be considered
completely slip-proof under every wet,
oily or contaminated condition.
ONE FINISH • MULTIPLE SPACES
Garage. Basement. Workshop. Laundry Room.
Use the coating where you want
a practical floor to look cleaner,
brighter and more visually finished.
🚗
Garages
Vehicle & storage areas
🏠
Basements
Finish utility spaces
🔧
Workshops
Hard-working floor areas
🧺
Laundry Rooms
Brighter everyday surfaces
PREPARATION MAKES THE DIFFERENCE
From Prepared Floor To Finished Surface.
The floor should be stable,
clean and dry before application.
Porous concrete or cement
is recommended to receive primer first.
1
Clean & Dry
Remove dust, dirt,
grease, oils and loose contamination.
2
Prime When Needed
Porous cement or concrete
is recommended to receive primer.
3
Spread The Coating
Apply the prepared epoxy
evenly across the floor.
4
Allow To Set
The current application guide
indicates approximately
12–24 hours drying time.
Temperature, humidity, surface porosity,
coating thickness and substrate condition
can change drying and curing time.
Use suitable ventilation and protective equipment
during preparation and application.
MAKE THE FLOOR PART OF THE DESIGN
Neutral, Bright Or Bold.
The current product selector includes
neutral greys and blacks
plus stronger decorative colors
for spaces where the floor itself
becomes part of the visual design.
Gray
Black
Warm Light
Pink
Yellow
Purple
Bluegreen
Orange
Light Green
Light Blue Denim
PRODUCT HIGHLIGHTS
More Than A Cosmetic Floor Change.
✨
Create A High-Gloss Finished Look
Upgrade exposed concrete
with a brighter,
more polished-looking surface.
↔️
Build A More Continuous Surface
Self-leveling application helps
visually reduce the rough,
unfinished look of bare flooring.
👣
Add Mineral Texture Underfoot
Quartz texture contributes
both visual depth
and enhanced traction.
🧼
Simplify Routine Cleanup
A continuous coated surface
can be easier to wipe and maintain
than rough unfinished concrete.
SPECIFICATIONS
Product Details
Product Type
Self-Leveling Epoxy Floor Coating
Finish
High-Gloss Speckled Finish
Surface Texture
Decorative Quartz / Mineral Texture
Concrete Preparation
Primer Recommended For Porous Cement / Concrete
Listed Drying Time
Approx. 12–24 Hours*
Common Applications
Garages • Basements • Workshops • Laundry Rooms
Current Color Options
Gray • Black • Warm Light • Pink • Yellow • Purple • Bluegreen • Orange • Light Green • Light Blue Denim
Bundle Labels
Buy 1: Up To 50 ft² • Buy 3: Up To 150 ft²
Coverage note:
the current product page contains two different
coverage references. The variant selector states
“Buy 1: usable area up to 50 ft²” and
“Buy 3: up to 150 ft²,” while the specification
section also references approximately
130–140 ft² per coat for a roughly
20L / 5.28 gal quantity.
Confirm the exact selected package quantity
before publishing one fixed coverage number.
BEFORE YOU START
Frequently Asked Questions
Do I need primer on concrete?
The current product guidance recommends
primer for porous cement
or concrete surfaces.
Can it be used over tile?
The current product guidance lists
suitable smooth surfaces such as tile
as possible applications.
The substrate still needs to be
stable, clean and properly prepared.
Does it repair structural cracks?
No. Major cracks,
loose concrete and structural damage
should be repaired appropriately
before applying a floor coating.
Is the finished floor completely slip-proof?
No. The quartz mineral texture
is intended to enhance traction,
but no coated floor should be considered
completely slip-proof under every
wet, oily or contaminated condition.
How long does it take to dry?
The current application guide
states approximately 12–24 hours.
Actual drying and curing time
varies with temperature,
humidity, substrate condition
and coating thickness.
Where can I use it?
Current product examples include
garages, basements,
workshops and laundry areas.
How much area does one package cover?
The current page contains different
coverage references depending on quantity.
Check the exact bundle and container size
before planning the project.
DON'T LET THE FLOOR DRAG DOWN THE WHOLE SPACE
Prep The Surface.
Spread The Coating.
Transform The Room From The Ground Up.
Give garages,
basements and workshops
a cleaner high-gloss floor
with decorative mineral texture.
CHOOSE YOUR COLOR ↑
✓ Self-Leveling
✓ High-Gloss Finish
✓ Quartz Texture
✓ 12–24h Listed Dry Time
